EZ-Access Rubber Threshold Ramps and Threshold Ramps with Beveled Sides

EZ-Access Rubber Threshold Ramps are made entirely of recycled tires. They are slip resistant and easy to install, indoors or outdoors, by simply placing the ramp against the threshold. Ramps come with or without beveled sides. Risers are also available when extra height is needed.

These rubber threshold ramps can be easily trimmed for lower heights and widths. Some doorways will require two ramps, one for each side of the threshold. We offer discounts on two or more threshold ramps. The weight capacity of each ramp is 850 lbs.

Rubber Threshold Ramp with Riser Capability (shown above) comes in a 2.5” height:

• 2.5” high - usable size 2.5”x24”x48” (overall size is 2.5”x24”x48”)
• Riser - 2 1/4” high - 24”x24” (risers are sold in pairs to accommodate the size of the ramp).

Ramps with beveled sides (shown in top image) come in 1.5” or 2.5” heights:

• 1.5” high - usable size 1.5”x14”x36” (overall size is 1.5”x14”x40”)
• 2.5” high - usable size 2.5”x25”x36” (overall size is 2.5”x25”x43”)

Returns are not accepted after 60 days of invoice and must be in original packaging.

EZ-Access Rubber Threshold Ramps and Threshold Ramps with Beveled Sides

Rubber Threshold Ramp with Riser Capability - 2.5” height:

• 2.5” - usable size 2.5”x24”x48” (overall size is 2.5”x24”x48”)
• Riser 2 1/4” - 24”x24” (risers are sold in pairs to accommodate the size of the ramp).

Ramps with beveled sides - 1.5” or 2.5” heights:

• 1.5” - usable size 1.5”x14”x36” (overall size is 1.5”x14”x40”)
• 2.5” - usable size 2.5”x25”x36” (overall size is 2.5”x25”x43”)

Returns are not accepted after 60 days of invoice and must be in original packaging.